Best Running Boards for 2024–2026 Toyota Tacoma Double Cab: 8 Picks, Slim Boards to Rock Sliders
Eight side steps listed for the 4th-generation Tacoma Double Cab, from Go Rhino's RB10, RB20 and RB30 in slim and full widths to drop steps, wheel-to-wheel boards and slider-style steps. On a mid-size truck that goes off-road, clearance is as important as the step.
Fit-checked means: matched to the maker's fit guide and part number, then checked against owner reports; not installed by us (how we chose). Covers the 2024, 2025 and 2026 Toyota Tacoma (4th Gen (N400)); some listings name fewer model years, so check the fit note on each pick.
- New generation in 2024. 2005–2023 boards don't fit.
- Double Cab only here. XtraCab boards are shorter.
- Slim boards keep clearance. RB20 Slim is 5.5 in (RealTruck).
- Off-road trims may have factory rails. Confirm before ordering.
- Sliders protect; boards step. CLAMBER does a bit of both.
2024–2026 Tacoma: fit checklist
| Variable | Versions | What to buy |
|---|---|---|
| Generation | 2005–2023 vs 2024+ | All picks 2024+ |
| Cab | XtraCab, Double Cab | All picks Double Cab |
| Powertrain | Gas or i-FORCE MAX | Same body; TAC names hybrid |
| Off-road trims | TRD Pro, Trailhunter | Check for factory rails |
What to look for in Tacoma running boards
Clearance vs step width
The Tacoma is a truck many owners take off pavement, so every inch of side clearance counts. Slim boards are the compromise: RealTruck lists the RB20 Slim at a 5.5 in step, compared with 7.5 in at the front and 6.5 in at the rear for the full RB20. The RB30 Slim adds flow-through slots. Drop steps give the lowest step and the least clearance. Wheel-to-wheel boards add length, not width. Decide how often you're on trails before choosing width.
Generation and cab
The 2024 Tacoma moved to the TNGA-F platform, and Go Rhino sells separate kits for 2005–2023 and 2024 Double Cabs, so older boards don't carry over. Every pick here is Double Cab; the XtraCab has shorter rear doors and needs shorter boards. The Go Rhino titles name only 2024; the TAC, BINARY STAR and OTHOWE listings run to 2025 or 2026.
Off-road trims and factory rails
Off-road-focused Tacomas may leave the factory with rock rails or rocker protection. Aftermarket boards use body mounting points that factory rails may already occupy, so you'd either replace the rails or skip boards. Confirm with the seller for a TRD Pro or Trailhunter. For trail use, slider-style steps like CLAMBER's give rocker protection and a step in one part.
Finish and warranty
RealTruck lists Go Rhino's RB20 and RB30 as galvanized 16-gauge steel under a textured powder coat or bedliner coating, with a limited lifetime structural warranty and 5-year finish warranty. The bedliner coating on several listings here resists gravel chips. TAC, BINARY STAR, OTHOWE and CLAMBER don't publish comparable terms on the pages we read.
Install
RealTruck lists the Go Rhino boards as no-drill bolt-ons with vehicle-specific brackets; OTHOWE's listing says no drilling. Slider-style steps often bolt to the frame rather than the body, which is a longer job. Use a helper, level each board, torque to spec and recheck after a week.
| Feature | Look for | Avoid |
|---|---|---|
| Generation | 2024+ in the title | 2005–2023 parts |
| Cab | Double Cab named | XtraCab boards |
| Clearance | Slim boards or sliders for trails | Drop steps off-road |
| Finish | Galvanized under coating | Bare paint in salt |
| Trim | Factory rails checked on TRD Pro/Trailhunter | Assuming mounting points are free |
| Warranty | Stated terms | None |
Side steps for the 2024–2026 Tacoma Double Cab
| Type | Example | Step | Clearance | Price band | Best for |
|---|---|---|---|---|---|
| Slim board | Go Rhino RB20 Slim | 5.5 in | Good | $430–$550 | Balanced |
| Full board | Go Rhino RB20 | 7.5 / 6.5 in | Fair | $450–$600 | Widest step |
| Slim slotted board | Go Rhino RB30 Slim | Narrow, slotted | Good | $430–$550 | Snow |
| Budget slim board | Go Rhino RB10 Slim | Narrow | Good | $300–$420 | Lower price, known brand |
| Drop steps | TAC Gen5 | 4 in drop | Low | $180–$260 | Short riders |
| Wheel-to-wheel board | BINARY STAR | Full length | Fair | $170–$240 | Bed access |
| Slider-style step | CLAMBER | 7.5 in | Good | $200–$280 | Trails |
#1: Go Rhino RB20 Slim Running Boards Bedliner 69443280ST — Best overall
Go Rhino RB20 Slim Running Boards Bedliner 69443280ST, 2024 Tacoma Double Cab (cab length)
Confirm fit on listingConfirm 2025-2026.- 5.5 in step keeps clearance (RealTruck)
- Galvanized 16-gauge steel
- Bedliner coating resists chips
- Limited lifetime structural, 5-year finish warranty
- No drilling
- Title names 2024; confirm 2025–2026
- Narrower step
- Priced close to the full RB20
Go Rhino's RB20 Slim 69443280ST is listed for the 2024 Tacoma Double Cab, cab length, in a bedliner coating. RealTruck describes the RB20 Slim as a narrower RB20 with a 5.5 in step, galvanized 16-gauge steel, a limited lifetime structural warranty and a 5-year finish warranty.
For a Tacoma, the slim width is the right balance. It gives adults a solid place to step while keeping more side clearance than a full board, which matters on trails and rutted roads. The bedliner coating shrugs off gravel, and the galvanizing protects the steel underneath.
RealTruck lists it as a no-drill bolt-on. The title names only 2024; confirm a 2025 or 2026 with the seller. Go Rhino also sells a textured-black version (69443280SPC) in our product list.
Who it's for: Most Double Cab owners who drive both road and trail.
| Spec | Value |
|---|---|
| Part # | Go Rhino 69443280ST |
| Step | 5.5 in (RealTruck) |
| Material | Galvanized 16-ga steel |
| Finish | Bedliner coating |
| Warranty | Limited lifetime structural, 5-yr finish |
| Fits | 2024 Tacoma Double Cab (cab length) |
#2: Go Rhino RB20 Running Boards Bedliner 69443280T — Widest step
Go Rhino RB20 Running Boards Bedliner 69443280T, 2024 Tacoma Double Cab (cab length)
Confirm fit on listingConfirm 2025-2026.- 7.5 in front, 6.5 in rear step (RealTruck)
- Galvanized steel with bedliner coating
- Same warranty terms
- No drilling
- Best for kids and older riders
- Less clearance than Slim
- Title names 2024
- Costs more than budget boards
Go Rhino's RB20 69443280T is the full-width version for the 2024 Tacoma Double Cab, cab length, in bedliner coating. RealTruck lists the step at 7.5 in at the front and 6.5 in at the rear.
The wider step suits families and anyone who wants a comfortable platform rather than a foothold. It gives up some clearance compared with the Slim.
For a Tacoma that stays mostly on pavement, the wider board is easier to use every day. Confirm later model years with the seller. Go Rhino also sells the RB20 with two pairs of drop steps for the 2024 Double Cab (in our product list) if you want an even lower first step.
Who it's for: Road-focused owners and families.
| Spec | Value |
|---|---|
| Part # | Go Rhino 69443280T |
| Width | 7.5 in front / 6.5 in rear (RealTruck) |
| Material | Galvanized 16-ga steel |
| Finish | Bedliner coating |
| Fits | 2024 Tacoma Double Cab |
#3: Go Rhino RB30 Slim Running Boards 69643280SPC — Best for snow
Go Rhino RB30 Slim Running Boards 69643280SPC, 2024 Tacoma Double Cab (cab length)
Listed for this truckFlow-through slots.- Slim RB30 with flow-through slots
- Slots shed dirt and snow (RealTruck)
- Galvanized steel
- Same warranty terms
- Good clearance
- Title names 2024
- Narrow step
- Textured black shows chips more than bedliner
Go Rhino's RB30 Slim 69643280SPC is listed for the 2024 Tacoma Double Cab, cab length. RealTruck describes the RB30 line with open flow-through slots that stop dirt and snow from building up, galvanized 16-gauge steel and the same lifetime structural and 5-year finish warranty.
For a Tacoma in snow country, the slots keep the step from packing with snow and icing over, and the slim width keeps clearance. Go Rhino also sells the full-width RB30 for the Tacoma (69643280PC).
Confirm 2025 and 2026 with the seller.
Who it's for: Snow-country owners who want a slim step.
| Spec | Value |
|---|---|
| Part # | Go Rhino 69643280SPC |
| Type | Slim slotted board |
| Material | Galvanized 16-ga steel |
| Finish | Textured black |
| Fits | 2024 Tacoma Double Cab |
#4: Go Rhino RB10 Slim Running Boards 63443280SPC — Best budget Go Rhino
Go Rhino RB10 Slim Running Boards 63443280SPC, 2024 Tacoma Double Cab (cab length)
Listed for this truckBudget Go Rhino.- Go Rhino RB10 Slim
- Galvanized steel per listing
- Lower price than RB20/RB30
- Slim profile
- Known brand
- Simpler design
- Title names 2024
- Specs thinner than RB20/RB30 pages
Go Rhino's RB10 Slim 63443280SPC is listed for the 2024 Tacoma Double Cab, cab length, in galvanized steel with textured black. It's the lower-priced board in Go Rhino's line.
It's for owners who want a known brand and galvanized steel for less than the RB20 or RB30. We didn't read an RB10-specific spec page, so check the listing for width and warranty.
Confirm later model years with the seller.
Who it's for: Owners who want a brand-name slim board for less.
| Spec | Value |
|---|---|
| Part # | Go Rhino 63443280SPC |
| Type | Slim board |
| Material | Galvanized steel (per listing) |
| Fits | 2024 Tacoma Double Cab |
| Price band | $300–$420 |
#5: TAC Gen5 4 in Drop Side Steps — Best drop steps
TAC Gen5 4 in Drop Side Steps, 2024-2025 Tacoma Double Cab (incl. Hybrid)
Listed for this truckDouble Cab only; lists i-FORCE MAX hybrid.- 4 in drop steps
- Names the i-FORCE MAX hybrid
- Lists 2024–2025 Double Cab
- Lower first step
- Budget price
- Least clearance
- No published warranty
- Not for trails
TAC's Gen5 4 in drop side steps are listed for the 2024–2025 Tacoma Double Cab, including the hybrid. They put a lower step at each door, helpful on lifted trucks and for short passengers.
They're the lowest point on the side of the truck, so skip them if you go off-road. TAC doesn't publish warranty terms we could check.
For a road truck with a lift, they're a practical, affordable option.
Who it's for: Lifted road trucks and short passengers.
| Spec | Value |
|---|---|
| Brand | TAC |
| Type | Drop steps |
| Drop | 4 in |
| Fits | 2024–2025 Tacoma Double Cab incl. hybrid |
| Price band | $180–$260 |
#6: CLAMBER 7.5 in Nerf Bars / Rock Sliders — Best for trails
CLAMBER 7.5 in Nerf Bars / Rock Sliders, 2024-2025 Tacoma Double Cab
Listed for this truckSlider-style step.- Slider-style nerf bars
- 7.5 in step per listing
- Rocker protection plus a step
- Lists 2024–2025 Double Cab
- Suits off-road builds
- Check mounting (often frame) and install time
- No published load or warranty specs
- Heavier than boards
CLAMBER's 7.5 in nerf bars are listed as rock sliders for the 2024–2025 Tacoma Double Cab. They're built to protect the rocker from rocks while giving a step.
For a Tacoma that sees trails, a slider-style step makes more sense than a running board, which can fold under a rock strike. Check the listing for mounting method and load rating, since sliders are only as strong as their mounts.
If your truck is a TRD Pro or Trailhunter with factory rock rails, confirm compatibility before ordering.
Who it's for: Off-road owners who want protection and a step.
| Spec | Value |
|---|---|
| Brand | CLAMBER |
| Type | Nerf bar / rock slider |
| Step | 7.5 in (per listing) |
| Fits | 2024–2025 Tacoma Double Cab |
| Price band | $200–$280 |
#7: BINARY STAR Wheel-to-Wheel Running Boards — Best wheel-to-wheel
BINARY STAR Wheel-to-Wheel Running Boards, 2024-2026 Tacoma Double Cab
Listed for this truckWheel-to-wheel coverage.- Wheel-to-wheel coverage
- Lists 2024–2026 Double Cab
- Step beside the bed
- Budget price
- Covers 2026
- Less clearance along the whole side
- No published warranty
- Little documentation
BINARY STAR's wheel-to-wheel running boards are listed for the 2024–2026 Tacoma Double Cab. They extend past the cab toward the rear wheel, adding a step beside the bed.
That helps reach into the bed, especially with a bed rack or topper. The longer board means less clearance along more of the truck's side.
BINARY STAR doesn't publish warranty terms we could check. OTHOWE's 5.5 in step bars, listed as no-drill, are another budget option in our product list. Check that the rear section clears any mud flaps and that a textured step surface is shown in the listing photos.
Who it's for: Owners who reach into the bed often.
| Spec | Value |
|---|---|
| Brand | BINARY STAR |
| Type | Wheel-to-wheel board |
| Fits | 2024–2026 Tacoma Double Cab |
| Price band | $170–$240 |
#8: Go Rhino RB20 Running Boards + 2 Pair Drop Steps 6944328020PC — Best board + drop steps
Go Rhino RB20 Running Boards + 2 Pair Drop Steps 6944328020PC, 2024 Tacoma Double Cab
Listed for this truckDrop-step kit.- RB20 boards plus 2 pairs of drop steps
- Galvanized steel
- Lower first step at each door
- Same warranty terms (RealTruck)
- One kit
- Most expensive here
- Least clearance of the Go Rhino options
- Title names 2024
This Go Rhino kit pairs the RB20 board with two pairs of drop steps for the 2024 Tacoma Double Cab, cab length, in textured black. The drop steps hang below the board at each door for a lower first step.
It combines the RB20's galvanized 16-gauge steel and lifetime structural warranty, per RealTruck, with the easier entry of drop steps. That suits a lifted Tacoma or a family truck with small kids.
It's the least trail-friendly Go Rhino option because the drop steps hang lowest. For a road-focused Double Cab with a lift, it's the most complete step setup here. Confirm 2025 and 2026 with the seller.
Who it's for: Lifted road Tacomas and families.
| Spec | Value |
|---|---|
| Part # | Go Rhino 6944328020PC |
| Includes | RB20 boards, brackets, 2 pairs drop steps |
| Material | Galvanized steel |
| Fits | 2024 Tacoma Double Cab (cab length) |
| Price band | $600–$750 |
Also fit-checked for the 2024–2026 Toyota Tacoma
- OTHOWE 5.5 in Step Bars, 2024-2026 Tacoma Double Cab — Amazon price $249.99 (as of 11/08/2026 18:01 UTC · Details) · Amazon
- Go Rhino RB20 Slim Running Boards Textured Black 69443280SPC, 2024 Tacoma Double Cab — Amazon price $489.99 (as of 11/08/2026 18:01 UTC · Details) · Amazon
Real-world fit: owner posts and install videos
How these parts look and go on in real Tacomas, from owners and installers. Each is shown through the platform's own embed and stays with its creator; we picked them, we did not make them.
How to install a running board on the Tacoma
- Confirm a 2024+ Double Cab and check for factory rock rails on off-road trims.
- Locate the body mounting points; remove plugs if present.
- Bolt brackets on hand-tight.
- With a helper, mount the boards and start all bolts.
- Level and torque every bolt to spec.
- Recheck torque after a week, and after the first trail run.
What to avoid
2005–2023 parts. The 2024 body is new.
XtraCab boards. Shorter doors.
Drop steps off-road. Lowest point on the side.
Ignoring factory rails. Check TRD Pro and Trailhunter first.
Bed, roof, hitch and interior, filtered to the 2024–2026 Toyota Tacoma.
Open the Tacoma fit hub → See the Tacoma upgrade plan →Frequently asked questions
What are the best running boards for a 2024–2026 Toyota Tacoma?
Go Rhino's RB20 Slim is the best overall pick for the Double Cab. RealTruck lists it with a 5.5 in step that keeps side clearance, galvanized 16-gauge steel, a bedliner coating and a limited lifetime structural warranty. The full-width Go Rhino RB20 is the widest step at 7.5 in front and 6.5 in rear, for families and road-focused trucks. The RB30 Slim adds flow-through slots for snow, TAC's Gen5 4 in drop steps give the lowest first step and name the hybrid, and CLAMBER's 7.5 in slider-style steps are the pick for trails. Every pick here is Double Cab, and the Go Rhino titles name only 2024, so confirm a 2025 or 2026 with the seller and check for factory rails on a TRD Pro or Trailhunter.
Do 2016–2023 Tacoma running boards fit the 2024+?
No. The 2024 Tacoma is a new generation on the TNGA-F platform with a new body and rocker. Go Rhino sells separate kits: 69442987PC for 2005–2023 Double Cab and the 69443280 series for the 2024 Double Cab. Buy listings that name 2024 or later.
Double Cab or XtraCab?
Every pick here is Double Cab. The 2024+ XtraCab has shorter rear doors (and no rear seat), so it needs shorter boards.
What does 'cab length' mean on Go Rhino's Tacoma listings?
The boards run under the doors only, between the wheel wells, rather than wheel to wheel. BINARY STAR's boards on this page are wheel-to-wheel, which adds coverage to the rear wheel well.
What's the difference between RB10, RB20 and RB30?
All three are Go Rhino galvanized steel boards. RealTruck lists the RB20 at 7.5 in at the front and 6.5 in at the rear and the RB20 Slim at a 5.5 in step; the RB30 has open flow-through slots and a 600 lb per side rating (RealTruck), and comes in a slim version. The RB10 is Go Rhino's simpler board, sold here as a slim version at a lower price.
Do these fit the Tacoma hybrid?
The i-FORCE MAX hybrid uses the same Double Cab body and rocker. TAC's drop steps name the hybrid. The Go Rhino titles don't mention powertrain; confirm with the seller for a hybrid.
What about the TRD Pro and Trailhunter?
Off-road trims may come with factory rock rails or rocker protection. Aftermarket boards bolt to the same body points, but you'll either replace the factory rails or find they occupy the mounting points. Confirm with the seller, and consider slider-style steps like CLAMBER's for trail use.
Are rock sliders better than running boards?
For off-road driving, yes. Sliders are built to protect the rocker from rocks and can take impacts; running boards are built for stepping. CLAMBER's slider-style steps try to do both. For road trucks, boards are easier to step on.
Why do Go Rhino titles only name 2024?
The listings we found name the 2024 Tacoma Double Cab. The 2025 and 2026 are the same generation; confirm with the seller or Go Rhino's fit guide.
Do I need to drill?
RealTruck lists the Go Rhino boards as bolt-on with no drilling. OTHOWE's listing says no drilling. Check other listings.
Can I install them myself?
Yes, with a helper. Bolt brackets to the body points, mount the boards, level, torque to spec and recheck after a week.
Which finish should I choose?
Go Rhino's bedliner coating resists gravel chips; textured black looks more finished. Both sit over galvanized steel with the same warranty per RealTruck.
Do running boards reduce the Tacoma's approach or departure angle?
No. Approach and departure angles are set by the front and rear bumpers. Running boards affect breakover and side clearance, since they hang below the rocker between the wheels. Slim boards and sliders keep more of both.
Can running boards hold a high-lift jack?
Running boards aren't jacking points. Use the frame or a slider designed and rated for jacking, and check the slider maker's instructions. Jacking on a running board can bend it or its brackets.
Buy Go Rhino's RB20 Slim for the best balance of step and clearance, the full RB20 for families, and CLAMBER's slider-style steps if the truck goes on trails.
The 4th-gen Tacoma needs side steps that respect clearance. Go Rhino's galvanized boards in slim and full widths carry the strongest published warranty, the RB30 Slim sheds snow, and the RB10 Slim saves money. TAC's drop steps suit lifted road trucks, BINARY STAR adds a bed-side step, and CLAMBER protects the rocker on trails.
Steps keep mud off the sill and floor liners. A bed rack or tonneau cover is the other common first Tacoma upgrade.
How we chose
We did not install these steps ourselves. We ranked them on the fitment each listing states for the 2024–2026 Tacoma Double Cab, on published retailer specs (step width, material, finish, warranty, load rating, drilling) and on listing details. Go Rhino specs come from RealTruck's product pages, read in September 2026. Amazon prices move daily, so the button shows the live price.
SourcesRelated guides
All running boards & steps guides by vehicle → · Everything that fits the 2024–2026 Toyota Tacoma →